This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and corrosion resistance. Precisely manufactured to 0.841" thickness, 34" length, and 45" width, it meets demanding industrial and aerospace specifications.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.841" |
| Length | 34" |
| Width | 45" |
Engineered for reliability and performance, this Titanium Grade 5 (Ti-6Al-4V) stock sheet boasts a minimum tensile strength of 128,000 psi and a yield strength of 120,000 psi. Its superior biocompatibility and excellent fatigue strength make it suitable for critical applications in the aerospace sector for airframe components, in the medical industry for implants, and for demanding marine and chemical processing equipment where extreme environmental resistance is paramount. The sheet's dimensions of 0.841" thickness, 34" length, and 45" width ensure suitability for various fabrication processes.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material certification and dimensions against project requirements. 2. Prepare surfaces for machining or joining according to industry best practices for titanium. 3. Fabricate components with appropriate tooling and techniques, adhering to safety protocols.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without proper modifications. | Employ specialized carbide or ceramic tooling designed for titanium machining, ensuring adequate coolant and appropriate cutting speeds to prevent excessive heat buildup and tool wear. |
| Inadequate post-fabrication cleaning leading to surface contamination. | Thoroughly clean all fabricated parts with non-chlorinated solvents and deionized water to remove residual machining fluids and prevent potential corrosion or embrittlement. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, High-performance marine hardware.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||