This Titanium Grade 5 stock sheet offers superior strength-to-weight ratio and excellent corrosion resistance. Precisely cut and ready for demanding industrial, aerospace, and medical applications.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.835" |
| Length | 38" |
| Width | 19" |
Precision-manufactured to tight tolerances, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.835 inches in thickness, 38 inches in length, and 19 inches in width. As a dual-phase alloy, it exhibits excellent tensile strength, fracture toughness, and fatigue strength, making it suitable for high-stress environments. The material's inherent biocompatibility and resistance to aggressive media ensure its suitability for critical implants and corrosive industrial processing equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility with intended application. 2. Ensure proper cutting and machining tools are used for Titanium Grade 5. 3. Follow established fabrication procedures for Ti-6Al-4V alloys.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard tooling for cutting Titanium Grade 5. | Employ specialized carbide or ceramic tooling with appropriate cooling and lubrication to prevent premature tool wear and ensure clean cuts. |
| Insufficient heat management during fabrication. | Implement effective heat dissipation strategies to avoid material degradation and maintain desired mechanical properties. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, High-performance marine hardware, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||