This high-performance Titanium Grade 5 stock sheet is engineered for the rigorous demands of pneumatic systems. Its superior strength-to-weight ratio and exceptional corrosion resistance make it ideal for critical components.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.792" |
| Length | 17" |
| Width | 44" |
Manufactured under strict quality controls, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.792 inches in thickness, 17 inches in width, and 44 inches in length. Renowned for its excellent biocompatibility, high tensile strength (approximately 132 ksi), and superior corrosion resistance in aggressive environments, this alloy is critical for high-pressure pneumatic cylinders, valve bodies, and housings. Its low density further enhances performance in weight-sensitive pneumatic machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants. 2. Precisely cut to the required dimensions using appropriate tooling for titanium. 3. Fabricate components according to design specifications, adhering to welding or fastening procedures suitable for Ti-6Al-4V.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without proper setup. | Utilize specialized carbide or high-speed steel tooling designed for titanium alloys, employing flood coolant to manage heat and prevent tool wear. |
| Inadequate post-fabrication cleaning. | Thoroughly degrease and clean all fabricated surfaces, especially before assembly or exposure to corrosive media, to maintain the integrity of the titanium surface. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Pneumatic Cylinder Barrels, High-Pressure Valve Components, Aerospace Pneumatic Housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||