This Titanium Grade 5 stock sheet is engineered for extreme industrial environments. Its exceptional strength-to-weight ratio and biocompatibility make it a prime choice for advanced lubricating systems and components.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.781" |
| Length | 47" |
| Width | 23" |
A high-performance industrial component, this Titanium Grade 5 (Ti-6Al-4V) stock sheet offers unparalleled performance in corrosive and high-stress applications. With a precise thickness of 0.781 inches, a length of 47 inches, and a width of 23 inches, it provides ample material for custom fabrication. Titanium Grade 5 exhibits excellent tensile strength, fatigue resistance, and wear characteristics, making it ideally suited for components within heavy-duty lubricating machinery, aerospace assemblies, and medical implants where biocompatibility and resistance to extreme conditions are paramount. Its low density further contributes to efficiency in dynamic systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of any surface contaminants before fabrication. 2. Utilize appropriate cutting and machining techniques for titanium alloys, ensuring proper coolant is applied. 3. Handle with care to prevent surface scratching or damage that could compromise performance in lubricating applications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard tooling without proper adjustments for titanium's hardness. | Employ carbide or cobalt tooling with slower speeds and increased feed rates, along with a high-quality cutting fluid specifically designed for titanium. |
| Inadequate surface preparation leading to premature wear in lubricating systems. | Thoroughly degrease and, if necessary, apply a suitable surface treatment or coating recommended for the specific lubricating environment. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-performance bearing cages, Corrosion-resistant pump components, Advanced aerospace lubrication systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||