This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and corrosion resistance. Precisely manufactured to 0.763" thickness, 39" length, and 28" width, it is engineered for reliability in critical applications.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.763" |
| Length | 39" |
| Width | 28" |
Designed for demanding industrial environments, this Titanium Grade 5 (Ti-6Al-4V) stock sheet offers superior mechanical properties, including high tensile strength, fatigue strength, and excellent corrosion resistance in aggressive media. Its precise dimensions of 0.763 inches (19.38 mm) thickness, 39 inches (990.6 mm) length, and 28 inches (711.2 mm) width make it suitable for fabrication in aerospace components, biomedical implants, chemical processing equipment, and high-performance automotive parts where material integrity under extreme conditions is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility with the intended application and environmental conditions. 2. Ensure proper cutting and machining techniques are employed to maintain material integrity and surface finish. 3. Implement appropriate welding or joining procedures specific to Titanium Grade 5, following industry best practices.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard welding consumables not designed for titanium alloys. | Utilize only inert gas shielded welding processes with filler materials specifically formulated for Titanium Grade 5 to prevent contamination and ensure weld integrity. |
| Inadequate surface preparation before welding or joining. | Thoroughly degrease and remove any oxides or contaminants from the titanium surface using non-abrasive methods and clean tools immediately prior to welding or joining. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Biomedical implants and prosthetics, Chemical processing equipment, High-performance automotive parts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||