This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance. Ideal for demanding environments where reliability and performance are paramount in lubricating systems.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.744" |
| Length | 36" |
| Width | 15" |
Engineered for reliability and performance, this Titanium Grade 5 stock sheet measures 0.744 inches in thickness, 36 inches in length, and 15 inches in width. Composed of approximately 90% titanium, 6% aluminum, and 4% vanadium, it exhibits excellent tensile strength, fatigue resistance, and exceptional inertness. Its high biocompatibility and non-galling properties make it a premier choice for critical components in high-performance lubrication systems, including bearings, bushings, and specialized pump parts operating under extreme conditions and corrosive media.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are meticulously clean and free of any contaminants. 2. Verify proper alignment of the sheet within the designated component. 3. Secure the sheet using appropriate fasteners or adhesive, adhering to specified torque values and curing times.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate surface preparation before installation, leading to potential galling or adhesion issues. | Thoroughly degrease and clean all mating surfaces using an approved industrial solvent. |
| Over-tightening fasteners, which can induce stress concentrations and compromise the material's integrity. | Utilize a calibrated torque wrench and adhere to the specified torque settings provided in the application's engineering drawings. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-performance bearing surfaces, Corrosion-resistant pump components, Specialized valve seats, Biocompatible medical device lubrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||