This robust Titanium Grade 5 stock sheet is engineered for superior performance in abrasive and polishing applications. Its exceptional strength-to-weight ratio and inherent corrosion resistance make it ideal for challenging industrial settings.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.735" |
| Length | 27" |
| Width | 16" |
Designed for demanding industrial environments, this Titanium Grade 5 (Ti-6Al-4V) stock sheet offers a nominal thickness of 0.735 inches, a length of 27 inches, and a width of 16 inches. As a dual-phase alloy, it exhibits excellent tensile strength, fatigue resistance, and superior corrosion resistance, particularly in oxidizing and chloride-rich environments. Its machinability and weldability are good, making it suitable for custom fabrication of critical components used in high-wear or corrosive service conditions within the aerospace, medical, and chemical processing industries.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of any contaminants before cutting or machining. 2. Utilize appropriate tooling and speeds for titanium machining to prevent overheating and tool wear. 3. Secure the sheet firmly during fabrication to avoid vibration and ensure dimensional accuracy.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without proper adjustments. | Employ carbide or high-speed steel tooling specifically designed for titanium, along with adequate coolant and reduced cutting speeds. |
| Ignoring the material's work hardening tendencies during machining. | Employ a continuous feed rate and avoid dwelling in any single cutting pass to prevent excessive hardening. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Custom abrasive grinding media, High-wear polishing fixtures, Corrosion-resistant substrate for specialized coatings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||