This Titanium Grade 5 stock sheet offers exceptional strength and corrosion resistance. Precisely fabricated to 0.702" thickness, 29" length, and 40" width, it's engineered for demanding industrial applications.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.702" |
| Length | 29" |
| Width | 40" |
A proven choice for industrial professionals, this Titanium Grade 5 (Ti-6Al-4V) stock sheet boasts a thickness of 0.702 inches, a length of 29 inches, and a width of 40 inches. This aerospace-grade alloy provides an outstanding strength-to-weight ratio, superior fatigue strength, and excellent corrosion resistance, making it ideal for critical components in aerospace, medical implants, and chemical processing equipment where performance under extreme conditions is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper cutting and shaping techniques are employed using appropriate tooling for titanium alloys. 2. Clean surfaces thoroughly to remove any contaminants prior to joining or assembly. 3. Utilize compatible welding procedures and inert gas shielding if welding is required, following industry best practices for Ti-6Al-4V.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without appropriate coatings or cooling. | Employ carbide or diamond-tipped tooling with ample coolant and slower cutting speeds to prevent premature tool wear and overheating. |
| Insufficient surface preparation before welding, leading to porosity or embrittlement. | Thoroughly degrease and mechanically clean weld joint areas, followed by inert gas purging to prevent atmospheric contamination during the welding process. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Chemical processing equipment, High-performance marine hardware.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||