This high-performance Titanium Grade 5 stock sheet offers exceptional strength, low density, and superior corrosion resistance. Precisely manufactured to meet demanding industrial specifications, it's ideal for critical component fabrication.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.672" |
| Length | 37" |
| Width | 29" |
A high-performance industrial component, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.672 inches in thickness, 37 inches in length, and 29 inches in width. Exhibiting an ultimate tensile strength typically exceeding 130 ksi and a yield strength around 120 ksi, it offers an unparalleled strength-to-weight ratio. Its excellent biocompatibility and resistance to aggressive environments make it suitable for aerospace, medical implants, and chemical processing equipment. The alpha-beta microstructure ensures good ductility and toughness at room temperature, while maintaining high strength at elevated temperatures up to 300°C.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Carefully inspect the sheet for any surface imperfections or damage prior to cutting. 2. Utilize appropriate sawing or cutting equipment designed for titanium alloys, ensuring proper coolant application to prevent overheating and tool wear. 3. Deburr all cut edges to remove sharp protrusions and ensure safe handling and subsequent machining operations.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not rated for titanium alloys. | Employ specialized carbide or high-speed steel tooling with optimized geometries and coatings for cutting titanium to prevent premature wear and ensure clean cuts. |
| Insufficient or improper coolant usage during cutting. | Apply a high-quality, dedicated titanium cutting fluid or a water-soluble coolant at an adequate flow rate to dissipate heat effectively, prolong tool life, and improve surface finish. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, High-performance automotive parts, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||