This high-performance Titanium Grade 5 stock sheet, measuring 0.670" thick by 13" wide and 37" long, offers exceptional strength-to-weight ratio and superior corrosion resistance, ideal for critical pneumatic components.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.670" |
| Length | 13" |
| Width | 37" |
Trusted by engineers across multiple sectors, this Titanium Grade 5 (Ti-6Al-4V) stock sheet exhibits a minimum tensile strength of 130 ksi and yield strength of 120 ksi, with a density of 0.160 lb/in³. Its excellent biocompatibility and fatigue resistance make it a prime choice for high-pressure pneumatic systems. The precise dimensions of 0.670" thickness, 13" width, and 37" length allow for efficient fabrication of robust housings, valve bodies, and structural elements in aerospace, medical, and industrial pneumatic equipment where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material certification against project requirements. 2. Precisely cut and machine to the required component geometry using appropriate tooling and coolant. 3. Inspect for any surface defects or dimensional inaccuracies prior to assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools without proper cooling, leading to work hardening and reduced tool life. | Employ high-speed steel or carbide tooling with ample coolant flow during machining operations. |
| Improper welding procedures, resulting in embrittlement or reduced mechanical properties. | Follow established titanium welding protocols, including inert gas shielding (e.g., Argon) and controlled pre/post-heating. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-pressure pneumatic cylinder components, Corrosion-resistant valve bodies and actuators, Lightweight structural elements in aerospace pneumatics.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||