This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance, making it ideal for high-demand electrical and lighting system components requiring long-term reliability.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.661" |
| Length | 35" |
| Width | 40" |
Built to exacting engineering tolerances, this 0.661-inch thick Titanium Grade 5 (Ti-6Al-4V) sheet measures 35 inches in width and 40 inches in length. Its high tensile strength and excellent fatigue resistance, coupled with its non-magnetic properties and inertness to many corrosive environments, ensure optimal performance in sensitive electrical applications. This material is critical for components subjected to extreme temperatures, high electrical loads, or corrosive atmospheric conditions, providing unparalleled durability and structural integrity where failure is not an option.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensional accuracy and material integrity against project specifications. 2. Prepare edges for welding or fastening using appropriate machining techniques, ensuring a clean, oxide-free surface. 3. Install using approved methods, adhering to all electrical and structural safety codes, and ensure proper grounding and insulation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation prior to welding or joining. | Thoroughly clean all surfaces with approved solvents and abrading agents to remove any oxides, oils, or contaminants. Ensure a bright, metallic finish. |
| Overheating during fabrication processes, leading to embrittlement. | Employ controlled heating cycles and appropriate shielding gases (e.g., Argon) during welding and heat treatment. Utilize lower heat input techniques and consider post-weld annealing. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-voltage conductor housings, Specialty lighting fixtures for corrosive environments, Electromagnetic shielding components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||