This robust Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance. Engineered for critical applications, it ensures reliability in aggressive environments.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.620" |
| Length | 19" |
| Width | 44" |
Designed for demanding industrial environments, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.620 inches thick, 19 inches wide, and 44 inches in length. Grade 5 titanium alloy exhibits excellent mechanical properties, including high tensile strength, superior fatigue resistance, and exceptional corrosion resistance in saltwater, chlorine, and various acidic environments. Its biocompatibility also makes it suitable for specialized medical device fabrication. This material is commonly utilized in aerospace structural components, marine hardware, chemical processing equipment, and high-performance automotive parts where reliability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting tool is appropriate for titanium alloys and properly sharpened to prevent excessive heat buildup and material deformation. 2. Machine surfaces should be thoroughly cleaned to remove any residual oils or contaminants that could affect subsequent bonding or welding. 3. If welding is required, utilize inert gas shielding (e.g., Argon) and appropriate titanium welding procedures to maintain material integrity and prevent atmospheric contamination.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for hard metals. | Employ carbide or diamond-tipped cutting tools and slow feed rates with adequate lubrication to prevent tool wear and material damage. |
| Inadequate cleaning before welding or bonding. | Thoroughly degrease and mechanically clean the titanium surfaces using non-chlorinated solvents and abrasive pads to ensure optimal joint performance. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Marine hardware and offshore equipment, Chemical processing vessels and piping.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||