This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance. Precisely manufactured to meet demanding industrial and safety standards, it's the material of choice for critical applications where performance is paramount.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.618" |
| Length | 46" |
| Width | 29" |
Built to exacting engineering tolerances, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.618 inches in thickness, 46 inches in length, and 29 inches in width. Exhibiting a tensile strength of approximately 130,000 psi and excellent biocompatibility, this alloy is renowned for its high strength, low density, and outstanding resistance to oxidation and corrosion in diverse environments. It is ideal for applications requiring high performance under extreme conditions, including aerospace structural components, medical implants, and demanding industrial processing equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all cutting and machining tools are appropriate for titanium alloys to prevent contamination and maintain surface integrity. 2. Carefully inspect the sheet for any surface defects or damage prior to fabrication. 3. Utilize proper welding procedures and inert gas shielding if welding is required, following established aerospace or medical grade titanium welding protocols.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for titanium, leading to poor cut quality and excessive tool wear. | Employ high-speed steel or carbide tooling with appropriate geometries and lubrication specifically formulated for machining titanium. |
| Inadequate cleaning of the surface before welding, resulting in weld porosity and reduced joint strength. | Thoroughly degrease and clean the weld area using appropriate solvents and maintain a strict inert gas shielding environment during the welding process. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Biocompatible medical implants, High-performance marine hardware.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||