This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance. Precisely manufactured to 0.603" thickness, 45" length, and 26" width, it's engineered for demanding fabrication projects.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.603" |
| Length | 45" |
| Width | 26" |
A proven choice for industrial professionals, this Titanium Grade 5 stock sheet (also known as Ti-6Al-4V) boasts a minimum tensile strength of 130,000 psi and a yield strength of 120,000 psi. Its excellent biocompatibility and resistance to saltwater and a wide range of chemicals make it indispensable in aerospace structural components, medical implants, marine hardware, and high-performance automotive parts. The dimensions of 0.603" thickness, 45" length, and 26" width allow for efficient utilization in complex designs.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper tooling and cutting parameters are set for titanium. 2. Securely fasten the sheet to prevent movement during fabrication. 3. Follow all safety guidelines for handling and working with titanium alloys.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without appropriate coatings or speeds. | Utilize carbide or high-speed steel tooling with specific coatings and reduced cutting speeds to prevent excessive heat buildup and tool wear. |
| Insufficient weld preheating or improper shielding gas selection for welding. | Implement appropriate preheating procedures (if required by specific welding standard) and always use a pure argon shielding gas to prevent contamination and ensure weld integrity. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, Marine hardware and subsea equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||