This Titanium Grade 5 stock sheet is engineered for superior strength-to-weight ratio and exceptional corrosion resistance, making it ideal for critical fabricating projects demanding peak performance.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.600" |
| Length | 16" |
| Width | 27" |
A high-performance industrial component, this Titanium Grade 5 stock sheet measures 0.600 inches in thickness, 16 inches in length, and 27 inches in width. Composed of Ti-6Al-4V, it offers a tensile strength of approximately 130 ksi and an elongation of 14%. Its passivation layer provides outstanding resistance to oxidation and chemical attack in aggressive environments. This alloy is readily weldable and machinable, suitable for aerospace components, medical implants, and high-performance marine structures.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare surfaces for fabrication according to industry best practices for Titanium Grade 5. 2. Fabricate using appropriate tooling and welding procedures for Ti-6Al-4V. 3. Inspect finished component for dimensional accuracy and material integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel welding procedures on Titanium Grade 5. | Employ specialized GTAW or PAW welding techniques with inert gas shielding (argon) and proper pre-heating to prevent contamination and ensure weld integrity. |
| Inadequate surface preparation before machining or welding. | Thoroughly clean the titanium surface to remove any oils, greases, or contaminants using appropriate degreasers and brushes to prevent defects. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and devices, Marine hardware and submersibles.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||