This premium Titanium Grade 5 stock sheet is engineered for demanding suspending and bracing applications. Its exceptional strength-to-weight ratio and corrosion resistance make it ideal for environments where reliability is paramount.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.565" |
| Length | 39" |
| Width | 40" |
Manufactured under strict quality controls, this Titanium Grade 5 (Ti-6Al-4V) sheet boasts a thickness of 0.565 inches, a length of 39 inches, and a width of 40 inches. Grade 5 titanium offers an excellent combination of high strength, low density, and superior corrosion resistance, making it suitable for aerospace, marine, and industrial bracing structures. It exhibits a tensile strength typically exceeding 138,000 psi and a yield strength over 130,000 psi, with a density of approximately 0.163 lb/in³. Proper edge preparation and welding procedures are critical for maintaining material integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely cut the sheet to the required dimensions using appropriate cutting tools for titanium. 2. Prepare all edges for joining, ensuring a clean and uniform surface. 3. Securely fasten the sheet using certified welding procedures or mechanical fasteners suitable for titanium alloys.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel fasteners without proper consideration for galvanic corrosion. | Utilize titanium or other compatible fasteners designed to prevent galvanic reactions with Grade 5 titanium. |
| Improper heat management during welding, leading to material embrittlement. | Employ controlled preheating and post-weld heat treatment procedures specific to Ti-6Al-4V to maintain optimal mechanical properties. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Marine bracing and supports, High-performance industrial equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||