This premium Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance, engineered for critical applications in harsh industrial settings.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.533" |
| Length | 31" |
| Width | 20" |
Designed for demanding industrial environments, this Titanium Grade 5 (Ti-6Al-4V) stock sheet boasts a nominal thickness of 0.533 inches, a length of 31 inches, and a width of 20 inches. Exhibiting an ultimate tensile strength of approximately 132,000 psi and a yield strength of 120,000 psi, it provides unparalleled durability and performance. Its low density (4.43 g/cm³) makes it ideal for weight-sensitive applications. Excellent biocompatibility and resistance to chloride-induced corrosion are key material properties.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper safety protocols are in place, including eye protection and gloves. 2. Fabricate and cut the sheet using appropriate tooling designed for titanium alloys. 3. Secure the fabricated component using compatible fasteners or welding procedures.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not rated for titanium. | Employ carbide or diamond-tipped cutting tools with adequate cooling to prevent overheating and tool wear. |
| Inadequate surface preparation before welding. | Thoroughly degrease and clean the weld area to remove any contaminants that could compromise weld integrity. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, Chemical processing equipment, High-performance marine hardware.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||