This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and corrosion resistance. Precisely sized for critical component fabrication in demanding industries.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.518" |
| Length | 14" |
| Width | 33" |
Precision-manufactured to tight tolerances, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.518 inches in thickness, 14 inches in width, and 33 inches in length. Exhibiting a minimum tensile strength of 130 ksi and yield strength of 120 ksi, it boasts excellent biocompatibility and resistance to saltwater and corrosive environments. This alloy is commonly employed in aerospace airframes and engine components, medical implants, and high-performance sporting goods where durability and weight are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material certification and dimensions against project requirements. 2. Prepare cutting and forming equipment for precise machining of Ti-6Al-4V. 3. Ensure proper handling to avoid surface contamination and maintain dimensional integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not rated for titanium alloys. | Employ specialized carbide or coated tooling with appropriate speeds and feeds to prevent tool wear and ensure clean cuts. |
| Inadequate surface preparation before welding or joining. | Thoroughly clean the surface with a degreaser and wire brush to remove any oxides or contaminants that could compromise joint integrity. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace airframe structures, Medical implants and surgical instruments, High-performance automotive components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||