This high-performance Titanium Grade 5 stock sheet is engineered for rigorous pneumatic systems. Its exceptional strength-to-weight ratio and unparalleled corrosion resistance ensure longevity and reliability in harsh industrial settings.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.480" |
| Length | 27" |
| Width | 36" |
Designed for demanding industrial environments, this Titanium Grade 5 stock sheet (0.480" thick, 27" length, 36" width) offers a superior combination of strength, low density, and biocompatibility. Titanium Grade 5 (Ti-6Al-4V) exhibits excellent fatigue strength and resistance to oxidation and crevice corrosion, making it ideal for high-pressure pneumatic components, cylinder bodies, and valve housings in corrosive atmospheres or where weight reduction is critical for system efficiency and maneuverability. Its mechanical properties are optimized for extreme temperature variations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material certification against project specifications. 2. Ensure cutting tools are appropriate for titanium alloy to prevent material degradation. 3. Deburr all cut edges thoroughly to remove sharp protrusions and prevent stress concentrations.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without proper coolant. | Employ specialized carbide or high-speed steel cutting tools designed for titanium, utilizing copious amounts of appropriate coolant to manage heat and prevent tool wear. |
| Inadequate edge finishing after cutting. | Always deburr and smooth all cut edges with fine-grit abrasives to eliminate potential stress risers that could lead to premature failure under pressure. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Pneumatic Cylinder Components, High-Pressure Pneumatic Housings, Valve Bodies for Corrosive Environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||