This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance. Precisely manufactured to 0.469" thickness, 47" length, and 25" width, it's engineered for critical material handling environments.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.469" |
| Length | 47" |
| Width | 25" |
A high-performance industrial component, this Titanium Grade 5 (Ti-6Al-4V) stock sheet exhibits a tensile strength typically exceeding 130 ksi and a yield strength over 120 ksi, with excellent ductility and fracture toughness. Its passivation layer provides remarkable resistance to aggressive chemicals and saltwater environments. The sheet dimensions of 0.469" thickness, 47" length, and 25" width make it suitable for fabricating structural elements, wear plates, and custom fixtures in demanding material handling systems, including those in aerospace, chemical processing, and marine industries where lightweight and durability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper lifting and handling equipment is used due to sheet weight. 2. Accurately cut to desired dimensions using appropriate abrasive cutting or sawing methods for titanium. 3. Securely fasten using compatible fasteners or welding techniques, considering titanium's specific joining requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without proper coolant and speed. | Employ specialized carbide or diamond-tipped tooling and maintain consistent coolant flow and appropriate cutting speeds to prevent tool wear and overheating. |
| Inadequate surface preparation before welding. | Thoroughly degrease and mechanically clean the weld area to remove any oxides or contaminants that could compromise weld integrity. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Custom fabricated lift components, Wear-resistant liners for chutes and hoppers, Structural elements in corrosive environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||