This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance, ideal for critical applications in aerospace, medical devices, and high-performance industrial equipment.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.446" |
| Length | 19" |
| Width | 47" |
Designed for demanding industrial environments, this Titanium Grade 5 (Ti-6Al-4V) stock sheet boasts a nominal thickness of 0.446 inches, a length of 19 inches, and a width of 47 inches. Exhibiting excellent tensile strength, fatigue resistance, and low density, this alloy is a preferred material for applications requiring high performance under extreme conditions. Its inherent biocompatibility makes it suitable for surgical implants and prosthetics, while its resistance to chloride stress corrosion cracking ensures longevity in marine and chemical processing industries.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all cutting and machining tools are clean and appropriate for titanium. 2. Accurately measure and mark cut lines on the sheet surface. 3. Utilize a high-quality cutting method (e.g., waterjet, laser, or band saw with appropriate blade) to achieve precise dimensions. 4. Deburr all cut edges thoroughly to prevent stress risers.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard tooling designed for steel, leading to excessive heat and tool wear. | Employ specialized carbide or high-speed steel tooling with appropriate cutting speeds and coolant for titanium. |
| Insufficient edge preparation after cutting, leaving sharp or burred edges. | Always deburr and round all edges to a specified radius to improve structural integrity and safety. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, High-performance automotive parts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||