This high-performance Titanium Grade 5 stock sheet delivers exceptional strength-to-weight ratio and superior corrosion resistance, crucial for critical safety applications in aerospace, medical, and industrial sectors.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.434" |
| Length | 23" |
| Width | 37" |
Manufactured under strict quality controls, this Titanium Grade 5 (Ti-6Al-4V) sheet boasts a nominal thickness of 0.434 inches, a length of 23 inches, and a width of 37 inches. This alloy offers an excellent combination of high strength, low density, good ductility, and outstanding corrosion resistance, making it ideal for applications demanding extreme performance and reliability. Its biocompatibility further extends its use into medical implants and equipment where safety is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect sheet for any surface defects or damage prior to fabrication. 2. Utilize appropriate cutting and machining tools designed for titanium alloys, maintaining adequate coolant flow. 3. Ensure all joining processes, such as welding or fastening, comply with industry standards for Titanium Grade 5 to maintain material integrity and performance.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without proper adjustments or coolant. | Employ specialized carbide or HSS tooling designed for titanium, and always use a high-quality cutting fluid to prevent overheating and tool wear. |
| Inadequate cleaning of the titanium surface before welding or bonding. | Thoroughly degrease and clean the titanium surface with appropriate solvents to remove contaminants that could compromise the integrity of the joint. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, High-corrosion resistance industrial equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||