This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance. Precisely manufactured to 0.422" thickness, 30" length, and 46" width, it is engineered for demanding industrial applications.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.422" |
| Length | 30" |
| Width | 46" |
A high-performance industrial component, this Titanium Grade 5 (Ti-6Al-4V) stock sheet boasts a nominal thickness of 0.422 inches, a length of 30 inches, and a width of 46 inches. Its alloy composition provides an ultimate tensile strength typically exceeding 130 ksi and a yield strength of at least 120 ksi, coupled with excellent fatigue strength and biocompatibility. This material is resistant to a wide range of corrosive media, making it suitable for fabrication in aggressive environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper cutting and shaping techniques are employed, utilizing tools designed for titanium alloys. 2. Clean surfaces thoroughly to remove any contaminants prior to welding or joining. 3. Implement appropriate welding procedures, such as TIG welding under inert gas shielding, to maintain material integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for titanium alloys. | Employ specialized carbide or coated tooling with appropriate speeds and feeds to prevent overheating and tool wear. |
| Inadequate surface preparation before welding, leading to porosity or contamination. | Mechanically clean all joint surfaces and ensure a consistent inert gas purge to prevent atmospheric contamination during welding. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components and airframes, Medical implants and surgical instruments, Chemical processing equipment and heat exchangers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||