This Titanium Grade 5 stock sheet offers exceptional strength, low density, and outstanding corrosion resistance. Precisely manufactured to demanding standards, it is an ideal raw material for critical applications.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.393" |
| Length | 39" |
| Width | 20" |
Manufactured under strict quality controls, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.393 inches thick, 39 inches in length, and 20 inches in width. Exhibiting a tensile strength of approximately 130-140 ksi and a yield strength of 120 ksi, it provides an excellent strength-to-weight ratio. Its biocompatibility and inertness make it suitable for demanding environments, including aerospace components, medical implants, and high-performance industrial equipment where durability and reliability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions and surface finish against project specifications. 2. Prepare surfaces for fabrication, ensuring cleanliness and absence of contaminants. 3. Fabricate using appropriate titanium welding and machining techniques, adhering to industry best practices for Grade 5.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel fabrication tools without proper adjustments. | Utilize specialized tooling and techniques designed for titanium alloys, such as slower speeds and increased coolant flow, to prevent tool wear and overheating. |
| Inadequate post-fabrication cleaning. | Thoroughly clean fabricated components to remove any residual lubricants, oxides, or contaminants that could compromise corrosion resistance or biocompatibility. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, High-performance automotive parts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||