This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance, making it the optimal choice for high-performance pneumatic systems where reliability is paramount.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.367" |
| Length | 39" |
| Width | 35" |
Manufactured under strict quality controls, this Titanium Grade 5 stock sheet measures 0.367 inches in thickness, 39 inches in length, and 35 inches in width. Composed of approximately 90% titanium, 6% aluminum, and 4% vanadium (Ti-6Al-4V), it provides outstanding tensile strength, fatigue resistance, and biocompatibility. Its inherent inertness ensures longevity in aggressive media environments common in advanced pneumatic actuation and control systems, offering a lightweight yet robust solution for critical components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and integrity before cutting. 2. Utilize appropriate tooling and techniques for machining titanium, ensuring proper cooling to prevent thermal degradation. 3. Deburr all edges thoroughly after cutting to prevent stress risers and potential failure points.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for titanium alloys, leading to tool breakage and poor surface finish. | Employ carbide or high-speed steel tooling specifically rated for titanium machining, along with adequate lubrication and cooling. |
| Improper handling and storage, resulting in surface damage or contamination that compromises corrosion resistance. | Store sheets in a clean, dry environment, protected from impact and contact with dissimilar metals. Use protective film as needed. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Pneumatic Cylinder Housings, High-Pressure Pneumatic Valves, Pneumatic Actuator Components, Corrosion-Resistant Pneumatic Manifolds.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||