High-performance Titanium Grade 5 (Ti-6Al-4V) stock sheet. Engineered for exceptional strength, low density, and excellent corrosion resistance, meeting rigorous industry standards for safety-critical applications.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.363" |
| Length | 28" |
| Width | 15" |
Specified by design engineers worldwide, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.363 inches (9.22 mm) in thickness, 28 inches (711.2 mm) in length, and 15 inches (381 mm) in width. This alloy boasts a minimum tensile strength of 130 ksi and yield strength of 120 ksi, with a density of 0.163 lb/in³. Its biocompatibility and resistance to saltwater corrosion make it ideal for aerospace structures, marine components, and advanced medical implants where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material certification and dimensions against design specifications. 2. Ensure proper cutting and forming equipment is calibrated for titanium. 3. Implement appropriate welding or joining procedures adhering to aerospace or medical industry standards.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without appropriate coatings or cooling. | Employ specialized titanium cutting tools with carbide or ceramic inserts and a liberal supply of coolant to prevent work hardening and tool wear. |
| Inadequate surface preparation before welding, leading to contamination. | Thoroughly clean the titanium surface with a degreaser and wire brush (dedicated for titanium) immediately prior to welding, followed by inert gas shielding. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, High-performance marine hardware.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||