This Titanium Grade 5 stock sheet is engineered for superior performance in abrading and polishing applications. Its exceptional strength-to-weight ratio and corrosion resistance make it ideal for demanding industrial environments.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.349" |
| Length | 30" |
| Width | 27" |
Manufactured under strict quality controls, this Titanium Grade 5 (Ti-6Al-4V) stock sheet boasts a nominal thickness of 0.349 inches, a length of 30 inches, and a width of 27 inches. Grade 5 titanium offers an excellent combination of high strength, low density, and outstanding corrosion resistance, making it suitable for aerospace, medical implants, and high-performance industrial components where wear and abrasion resistance are critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface intended for abrasion or polishing is clean and free of contaminants. 2. Carefully position the Titanium Grade 5 sheet according to the design requirements. 3. Secure the sheet using appropriate industrial fastening methods suitable for titanium applications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard abrasive materials that can cause premature wear on the titanium. | Employ specialized abrasive media and tools designed for use with titanium alloys to maximize longevity and effectiveness. |
| Inadequate cleaning of the sheet prior to application, leading to surface imperfections. | Thoroughly degrease and clean the titanium sheet with appropriate industrial solvents before commencing any abrading or polishing operations. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-performance abrasive surfaces, Specialized polishing substrates, Wear-resistant components in corrosive environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||