This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance. Precisely cut to 0.295" thickness, 29" length, and 13" width, it's engineered for critical applications.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.295" |
| Length | 29" |
| Width | 13" |
Trusted by engineers across multiple sectors, this Titanium Grade 5 (Ti-6Al-4V) stock sheet provides an optimal blend of high strength, low density, and excellent biocompatibility. With a thickness of 0.295 inches, a length of 29 inches, and a width of 13 inches, it meets stringent specifications for demanding environments. Its high tensile strength (over 130 ksi) and fracture toughness make it a preferred material for aerospace components, surgical implants, and high-performance industrial equipment subjected to extreme conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions and surface finish against project specifications. 2. Ensure appropriate cutting tools and speeds for titanium are utilized to prevent thermal damage and maintain edge integrity. 3. Deburr all cut edges thoroughly to remove any sharp protrusions.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for titanium alloys. | Employ carbide or high-speed steel tooling with appropriate coatings and generous coolant flow to manage heat and prevent tool wear. |
| Inadequate edge preparation after cutting, leading to stress risers. | Always thoroughly deburr and radius all cut edges to a smooth finish, ensuring no sharp corners remain that could initiate cracks. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, High-performance automotive parts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||