This premium Titanium Grade 5 stock sheet is engineered for superior performance in the most demanding abrading and polishing environments. Its exceptional strength-to-weight ratio and corrosion resistance make it the ideal substrate for advanced surface finishing applications.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.246" |
| Length | 40" |
| Width | 43" |
Purpose-built for heavy-duty applications, this Titanium Grade 5 (Ti-6Al-4V) stock sheet offers an unparalleled combination of strength, toughness, and corrosion resistance. Measuring 0.246 inches in thickness, 40 inches in length, and 43 inches in width, it is ideal for fabricating robust components used in aggressive environments. The alloy's excellent fatigue strength and biocompatibility also make it suitable for specialized industrial and medical applications where surface integrity and longevity are paramount. Its high melting point and resistance to a wide range of chemicals ensure consistent performance under extreme conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface receiving the titanium sheet is clean, dry, and free of contaminants. 2. Carefully position the sheet to its intended location, avoiding any sharp impacts or bending. 3. Secure the sheet using appropriate fastening methods (e.g., welding, mechanical fasteners) suitable for titanium, following industry best practices for material joining.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard tooling not designed for titanium alloys. | Employ specialized tooling with appropriate geometries and coatings designed for machining and fabricating titanium to prevent premature wear and ensure clean cuts. |
| Inadequate cleaning of mating surfaces before joining. | Thoroughly degrease and abrade all surfaces to be joined to ensure optimal adhesion and prevent contamination that could compromise joint integrity. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-performance abrasive backing plates, Corrosion-resistant polishing fixtures, Specialized industrial component fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||