This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance. Precision-cut to 0.236" thickness, 22" width, and 37" length, it's engineered for critical applications where performance and reliability are paramount.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.236" |
| Length | 22" |
| Width | 37" |
Designed for demanding industrial environments, this Titanium Grade 5 (Ti-6Al-4V) stock sheet boasts a nominal thickness of 0.236 inches, a width of 37 inches, and a length of 22 inches. Exhibiting an ultimate tensile strength typically exceeding 130 ksi and a yield strength of approximately 120 ksi, its exceptional biocompatibility and corrosion resistance make it ideal for aerospace airframes, engine components, medical implants, and demanding chemical processing equipment where extreme conditions are standard.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material certification and dimensions against project requirements. 2. Ensure proper cutting and shaping tools are used, suitable for titanium alloys. 3. Implement appropriate welding or joining techniques for Ti-6Al-4V if necessary.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without proper adjustments. | Employ carbide-tipped or specialized titanium cutting tools and maintain appropriate speeds and feeds to prevent overheating and tool damage. |
| Inadequate surface preparation before welding. | Thoroughly clean the joint area with a degreaser and wire brush to remove contaminants, then perform welding in an inert gas atmosphere (e.g., Argon) to prevent oxidation. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||