This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance. Precisely fabricated to 0.233" thickness, 19" width, and 35" length, it's ideal for critical industrial and aerospace projects.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.233" |
| Length | 19" |
| Width | 35" |
Manufactured under strict quality controls, this Titanium Grade 5 (Ti-6Al-4V) sheet exhibits a minimum tensile strength of 138,000 psi and yield strength of 130,000 psi. Its nominal composition includes 6% Aluminum and 4% Vanadium, providing excellent fatigue strength and high-temperature performance. The sheet measures 0.233 inches in thickness, 19 inches in width, and 35 inches in length, meeting stringent industry standards for aerospace airframes, prosthetic implants, marine components, and high-performance sporting goods.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all cutting and shaping tools are appropriate for titanium alloys to prevent contamination and maintain material integrity. 2. Prepare joining surfaces according to specific welding or fastening procedures for Titanium Grade 5. 3. Install component, adhering to all design specifications and load requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools which can lead to excessive heat and tool wear. | Utilize specialized carbide or diamond-tipped tooling designed for titanium machining. |
| Inadequate cleaning of surfaces prior to welding, leading to porosity or embrittlement. | Thoroughly degrease and chemically clean all joint surfaces using approved solvents and procedures. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, Marine hardware and offshore equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||