This Titanium Grade 5 stock sheet offers superior strength-to-weight ratio and exceptional corrosion resistance, making it a premier choice for critical fabrication projects requiring durability and performance.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.203" |
| Length | 31" |
| Width | 30" |
Built to exacting engineering tolerances, this Titanium Grade 5 (Ti-6Al-4V) sheet measures 0.203 inches thick, 31 inches in length, and 30 inches in width. Composed of approximately 6% aluminum and 4% vanadium, this alloy exhibits excellent biocompatibility, high fatigue strength, and resistance to saltwater and various industrial chemicals. Its machinability and weldability allow for complex component creation. Ideal for aerospace structures, implantable medical devices, and high-performance marine components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material certification and dimensions against project requirements. 2. Ensure proper cutting and shaping tools are selected for Titanium Grade 5. 3. Implement appropriate welding procedures, if applicable, using inert gas shielding.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel cutting tools which can lead to rapid tool wear and poor cut quality. | Utilize specialized tooling designed for titanium alloys, such as carbide or cobalt-based high-speed steel, with appropriate coolant and feed rates. |
| Inadequate pre-cleaning before welding, resulting in potential contamination and compromised weld integrity. | Thoroughly degrease and clean the weld area with a suitable solvent and wire brush to remove any surface contaminants. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, High-performance marine hardware.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||