This Titanium Grade 5 stock sheet is engineered for extreme environments within pneumatic applications. Its exceptional strength-to-weight ratio and superior corrosion resistance ensure longevity and reliable performance.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.162" |
| Length | 38" |
| Width | 32" |
A high-performance industrial component, this Titanium Grade 5 stock sheet (Ti-6Al-4V) measures 0.162 inches in thickness, 38 inches in length, and 32 inches in width. As the workhorse of aerospace and demanding industrial sectors, Grade 5 titanium exhibits an ultimate tensile strength of approximately 130-140 ksi and a yield strength of 120 ksi, with excellent fatigue strength and weldability. Its remarkable biocompatibility and resistance to chloride stress corrosion cracking make it ideal for corrosive media and high-pressure pneumatic circuits where weight reduction and material integrity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper safety equipment is worn, including eye protection and gloves. 2. Precisely cut the sheet to the required dimensions for your pneumatic component using appropriate cutting tools for titanium. 3. Smooth all edges to prevent stress concentrations and ensure a clean finish, followed by any necessary surface treatments or finishing operations.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for titanium alloys. | Utilize carbide-tipped or high-speed steel tools with proper lubrication and slower cutting speeds to prevent tool wear and material damage. |
| Insufficient edge preparation leading to premature failure. | Thoroughly deburr and smooth all cut edges to remove sharp points and potential stress risers, ensuring structural integrity. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-pressure pneumatic cylinder bodies, Valve components in corrosive environments, Lightweight structural elements in aerospace pneumatics.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||