This Titanium Grade 5 stock sheet offers superior strength-to-weight ratio and corrosion resistance. Precisely manufactured to 0.157" thickness, 29" length, and 23" width for critical fabricating applications.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.157" |
| Length | 29" |
| Width | 23" |
Built to exacting engineering tolerances, this Titanium Grade 5 (Ti-6Al-4V) stock sheet delivers exceptional performance. Measuring 0.157 inches (4.0 mm) thick, 29 inches (736.6 mm) in length, and 23 inches (584.2 mm) in width, it exhibits a typical tensile strength exceeding 130 ksi and excellent biocompatibility. Its alloy composition provides outstanding resistance to oxidation and chemical attack, making it ideal for aerospace components, surgical implants, marine hardware, and high-performance industrial equipment where durability and reliability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure a clean and dry work area. 2. Utilize appropriate cutting and forming tools designed for titanium alloys. 3. Follow industry-standard welding or joining procedures for Titanium Grade 5, if applicable.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without proper lubrication and cooling. | Employ carbide-tipped or specialized titanium cutting tools with high-speed steel inserts, and ensure ample coolant flow to prevent excessive heat buildup and tool wear. |
| Attempting to bend without accounting for titanium's higher springback compared to steel. | Pre-calculate bend radii and angles with a higher springback allowance, and consider using a three-point bending method for greater control. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, High-performance automotive parts, Marine hardware and subsea equipment, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||