This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and corrosion resistance. Precisely cut to 0.156" thickness, 13" width, and 32" length, it's engineered for critical performance in demanding environments.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.156" |
| Length | 13" |
| Width | 32" |
Precision-manufactured to tight tolerances, this 0.156" thick Titanium Grade 5 sheet (ASTM B265) provides a robust material solution. Exhibiting a minimum tensile strength of 130 ksi and yield strength of 120 ksi, Ti-6Al-4V alloy offers excellent biocompatibility and superior resistance to oxidation and corrosion in aggressive media. Its remarkable mechanical properties make it suitable for applications in aerospace structural components, medical implants, marine hardware, and high-performance sporting equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the cutting surface ensuring it is clean and free from contaminants. 2. Accurately mark the desired cut lines according to project specifications. 3. Utilize appropriate cutting tools (e.g., waterjet, laser, or abrasive saw) with coolant to prevent thermal degradation and maintain material integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools without proper coolant. | Always employ cutting methods with adequate coolant to manage heat and avoid compromising the titanium's microstructure and mechanical properties. |
| Ignoring surface contamination before fabrication. | Thoroughly clean the titanium surface to prevent the introduction of impurities that could affect weldability or component performance. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, Marine hardware and offshore equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||