Precision-fabricated Titanium Grade 5 stock sheet offering exceptional strength-to-weight ratio. This material is engineered for demanding environments, ensuring durability and reliability in critical applications.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.139" |
| Length | 14" |
| Width | 15" |
Specified by design engineers worldwide, this Titanium Grade 5 stock sheet (Ti-6Al-4V) exhibits superior tensile strength and fatigue resistance, critical for applications subjected to extreme stress and corrosive media. With a nominal thickness of 0.139 inches, a length of 14 inches, and a width of 15 inches, this sheet conforms to stringent aerospace and industrial standards. Its biocompatibility and excellent corrosion resistance make it the material of choice for medical implants, chemical processing equipment, and high-performance automotive components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all cutting and machining tools are suitable for titanium alloys to prevent contamination and maintain material integrity. 2. Thoroughly clean the work area and the sheet surface to remove any debris or oils. 3. When fastening, utilize compatible titanium hardware and appropriate torque specifications to avoid stress concentration.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools, which can lead to tool wear and poor cut quality. | Employ specialized carbide or cobalt-based tooling designed for titanium alloys, ensuring adequate cooling. |
| Over-tightening fasteners, which can cause galling or material deformation. | Use a calibrated torque wrench and apply torque in stages according to recommended procedures for titanium. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, High-performance automotive parts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||