Engineered from high-performance Titanium Grade 5 alloy, this stock sheet offers superior strength-to-weight ratio and exceptional corrosion resistance. Precisely manufactured for critical applications.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.120" |
| Length | 44" |
| Width | 29" |
Purpose-built for heavy-duty applications, this Titanium Grade 5 stock sheet is meticulously manufactured to exacting standards. Measuring 0.120 inches in thickness, 44 inches in length, and 29 inches in width, it delivers a robust and reliable material solution. Titanium Grade 5 (Ti-6Al-4V) is renowned for its exceptional tensile strength, fatigue resistance, and biocompatibility, making it the material of choice for aerospace components, medical implants, marine hardware, and high-performance automotive parts subjected to extreme environments and mechanical stress. Its inherent passivation layer provides unparalleled resistance to a wide range of corrosive media.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material specifications against project requirements. 2. Ensure proper cutting and machining tools are selected for titanium. 3. Adhere to recommended welding procedures if joining is required.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without appropriate coatings or speeds. | Utilize carbide or high-speed steel tooling with optimized cutting parameters and coolant to prevent premature wear and ensure clean cuts. |
| Inadequate surface preparation before welding. | Thoroughly degrease and remove any oxides or contaminants from the weld joint to ensure a strong, defect-free weld. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, Marine and offshore equipment, High-performance automotive parts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||