This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance, ideal for high-performance pneumatic systems requiring durability and reliability.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.108" |
| Length | 42" |
| Width | 30" |
Manufactured under strict quality controls, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.108 inches thick, 42 inches in length, and 30 inches in width. Grade 5 titanium provides excellent mechanical properties, including high tensile strength, fatigue strength, and fracture toughness, while maintaining good weldability and formability. Its inherent biocompatibility and resistance to aggressive media make it a preferred material for critical components in advanced pneumatic actuators, valve bodies, and cylinder liners where weight reduction and extreme environmental tolerance are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from debris or contaminants before any fabrication. 2. Utilize appropriate cutting and shaping tools designed for titanium alloys to maintain material integrity. 3. When welding, adhere to established procedures for Ti-6Al-4V to prevent oxidation and maintain mechanical properties.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel tooling without proper coolant or speed adjustments. | Employ specialized carbide or high-speed steel tooling with generous coolant flow and slower cutting speeds to prevent tool overheating and galling. |
| Inadequate post-fabrication cleaning, leaving residual lubricants or debris. | Thoroughly degrease and clean all fabricated parts with appropriate solvents to ensure optimal performance and prevent contamination in pneumatic systems. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-pressure pneumatic cylinder construction, Corrosion-resistant valve bodies for aggressive media, Lightweight pneumatic actuator components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||