This Titanium Grade 5 stock sheet is engineered for the rigorous demands of pneumatic systems. Offering superior strength, corrosion resistance, and a high strength-to-weight ratio, it ensures reliable performance in challenging environments.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.107" |
| Length | 21" |
| Width | 31" |
Precision-manufactured to tight tolerances, this Titanium Grade 5 (Ti-6Al-4V) sheet measures 0.107 inches thick, 21 inches in length, and 31 inches in width. Its exceptional properties, including high tensile strength, fatigue resistance, and excellent corrosion resistance in aggressive media, make it ideal for critical pneumatic components. The alloy's biocompatibility and low density further enhance its suitability for specialized pneumatic applications where performance and reliability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of contaminants before fabrication. 2. Utilize appropriate tooling and techniques for cutting, forming, and welding titanium alloys. 3. Verify dimensional accuracy and surface finish after all fabrication steps are completed.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without proper adjustments. | Employ carbide or high-speed steel tooling with appropriate speeds, feeds, and coolant for titanium to prevent premature tool wear and maintain cut quality. |
| Improper welding procedures leading to embrittlement. | Weld titanium Grade 5 in a controlled inert gas atmosphere (e.g., Argon) to prevent contamination and subsequent embrittlement. Pre-heating and post-weld heat treatment may be necessary depending on the application. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Pneumatic cylinder components, Valve bodies and internal mechanisms, Air tool housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||