This Titanium Grade 5 stock sheet offers exceptional strength, low density, and superior corrosion resistance. Precisely manufactured to 0.094" thickness, 21" length, and 40" width, it's the preferred material for critical components.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.094" |
| Length | 21" |
| Width | 40" |
Specified by design engineers worldwide, this Titanium Grade 5 (Ti-6Al-4V) stock sheet boasts a minimum tensile strength of 132,000 psi and yield strength of 120,000 psi. Its excellent biocompatibility and resistance to saltwater corrosion make it suitable for aerospace airframes, engine components, medical implants, and marine hardware. The sheet adheres to ASTM B265 standards for aerospace and industrial applications requiring high performance and reliability.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material meets all design specifications and tolerances. 2. Prepare surfaces for fabrication, ensuring cleanliness and freedom from contaminants. 3. Fabricate using appropriate tooling and techniques for titanium alloys, considering heat dissipation and tool wear.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel fabrication techniques without modification. | Employ specialized tooling and slower cutting speeds with adequate coolant when machining or forming Titanium Grade 5 to prevent tool breakage and excessive heat buildup. |
| Inadequate post-fabrication cleaning. | Thoroughly clean fabricated parts with appropriate solvents to remove any residual lubricants or debris, especially critical for medical or aerospace applications. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace Airframes and Components, Medical Implants and Surgical Instruments, High-Performance Sporting Goods, Marine Hardware and Subsea Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||