This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance. Engineered for demanding environments, it is a prime choice for critical components in advanced lubrication systems.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.054" |
| Length | 39" |
| Width | 31" |
Engineered for reliability and performance, this Titanium Grade 5 (Ti-6Al-4V) stock sheet boasts a thickness of 0.054 inches, a length of 39 inches, and a width of 31 inches. This alloy exhibits excellent tensile strength, fatigue resistance, and biocompatibility, making it ideal for applications exposed to harsh chemicals, high temperatures, or biological fluids where friction reduction and wear resistance are paramount. Its non-galling properties further enhance its utility in dynamic lubrication scenarios, ensuring smooth operation and extended component lifespan within aerospace, medical, and chemical processing industries.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Thoroughly clean the contact surfaces to remove any contaminants. 2. Ensure proper alignment of the sheet with the mating components. 3. Secure the sheet using appropriate fastening methods, considering the alloy's properties and the application's load requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to adhesion issues. | Always degrease and dry all surfaces before installation. Consider abrasive preparation for enhanced bonding if required by the application. |
| Over-tightening fasteners, causing localized stress concentrations. | Utilize torque specifications appropriate for Titanium Grade 5 to prevent deformation and maintain structural integrity. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-performance bearing components, Low-friction sliding surfaces in chemical pumps, Biocompatible seals and gaskets in medical devices.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||