This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and corrosion resistance. Precisely cut for critical fabrication projects requiring superior performance.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.045" |
| Length | 27" |
| Width | 18" |
Precision-manufactured to tight tolerances, this Titanium Grade 5 (Ti-6Al-4V) sheet measures 0.045 inches in thickness, 27 inches in length, and 18 inches in width. As a dual-phase alloy, it combines excellent tensile strength with good ductility, yielding a high performance-to-weight ratio that is crucial for aerospace components, biomedical implants, and high-stress industrial applications. Its inherent biocompatibility and resistance to saltwater and a wide range of chemicals make it suitable for marine environments and chemical processing equipment. This material is readily machinable and weldable using appropriate procedures.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper cutting and shaping using tools designed for titanium alloys. 2. Prepare surfaces for joining or assembly, removing any oxides or contaminants. 3. Employ appropriate welding techniques (e.g., GTAW) or fastening methods suitable for Titanium Grade 5.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for titanium alloys. | Utilize carbide or high-speed steel tooling with appropriate cutting speeds and lubrication to prevent excessive heat buildup and tool wear. |
| Inadequate surface preparation before welding or bonding. | Thoroughly clean surfaces with a degreaser and wire brush, followed by inert gas purging during welding to prevent atmospheric contamination. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Biomedical implants and devices, High-performance marine hardware.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||