This Schedule 80 seamless pipe, crafted from high-performance Titanium Grade 5, offers exceptional strength and corrosion resistance. Engineered for extreme environments, it ensures reliability in critical applications.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Pipe Size | 2.8" |
| Outside Diameter | 1.094" |
| Wall Thickness | 0.143" |
Built to exacting engineering tolerances, this seamless pipe boasts a nominal pipe size of 2.8" with an outside diameter of 1.094" and a robust wall thickness of 0.143". Fabricated from Titanium Grade 5 (Ti-6Al-4V), it exhibits a superior strength-to-weight ratio, excellent corrosion resistance in aggressive media, and good weldability. Its high tensile strength and low density make it ideal for aerospace, medical implants, and demanding chemical processing industries where performance and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify pipe dimensions and material grade against project specifications. 2. Prepare pipe ends using approved cutting and beveling methods for proper joint integrity. 3. Perform welding using compatible filler materials and procedures as per industry standards (e.g., AWS D10.7M/D10.7).
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect welding consumables for Titanium Grade 5. | Employ GTAW or plasma arc welding with appropriate argon shielding gas and recommended filler metals for Ti-6Al-4V to prevent contamination and ensure weld quality. |
| Inadequate cleaning of pipe surfaces before welding. | Thoroughly clean the pipe ends and surrounding areas with a stainless steel brush and acetone or a degreaser to remove any oils, dirt, or oxides that could compromise weld integrity. |
A: This Seamless Pipe, Schedule 80 is manufactured from Titanium Grade 5.
A: Aerospace components requiring high strength and low weight, Chemical processing equipment for corrosive environments, Medical implants and surgical instruments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||