This Titanium Grade 5 seamless pipe, Schedule 40, offers exceptional strength-to-weight ratio and superior corrosion resistance. Engineered for critical applications where reliability is paramount.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Pipe Size | 4.2" |
| Outside Diameter | 5.163" |
| Wall Thickness | 0.359" |
Designed for demanding industrial environments, this Schedule 40 seamless pipe boasts a 4.2" nominal pipe size with an actual outside diameter of 5.163" and a substantial 0.359" wall thickness. Constructed from Ti-6Al-4V (Grade 5) titanium alloy, it provides excellent mechanical strength, high tensile strength, and outstanding resistance to a wide range of corrosive media, including saltwater, chlorides, and various acids. Its operating temperature range and pressure capabilities make it suitable for aerospace, marine, oil and gas, and chemical processing industries.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free of debris. 2. Apply appropriate sealant or thread tape to threaded connections. 3. Securely tighten fittings using calibrated tools, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect welding consumables for titanium. | Utilize only Grade 2 titanium welding rods or wire specifically designed for Grade 5 titanium to ensure weld integrity. |
| Insufficient purging during welding. | Employ a thorough inert gas purging (argon) on both the inside and outside of the weld joint to prevent oxidation and embrittlement. |
A: This Seamless Pipe, Schedule 40 is manufactured from Titanium Grade 5.
A: Chemical processing equipment, Aerospace fluid conveyance systems, Marine components and heat exchangers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||