This Schedule 40 seamless pipe, crafted from high-performance Titanium Grade 5, offers exceptional strength-to-weight ratio and superior corrosion resistance. Engineered for demanding applications.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Pipe Size | 3.2" |
| Outside Diameter | 2.143" |
| Wall Thickness | 0.180" |
Manufactured under strict quality controls, this 3.2" nominal size, Schedule 40 seamless pipe features a precise 2.143" outside diameter and a robust 0.180" wall thickness. Composed of Titanium Grade 5 (Ti-6Al-4V), it exhibits excellent tensile strength, fatigue resistance, and remarkable inertness to a wide range of corrosive media, including saltwater, chlorides, and many acids. Its biocompatibility also makes it suitable for medical implants. This material's properties ensure long service life in extreme environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper pipe end preparation, including deburring and cleaning. 2. Utilize compatible welding procedures and filler materials as specified for Titanium Grade 5. 3. Perform thorough non-destructive testing (e.g., X-ray, ultrasonic) to verify weld integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel welding techniques and filler metals. | Always use specific titanium welding procedures (e.g., GTAW) and certified titanium filler materials to prevent contamination and maintain material integrity. |
| Insufficient post-weld cleaning and inspection. | Thoroughly clean and inspect all welds to identify any defects that could compromise the pipe's performance and lifespan. |
A: This Seamless Pipe, Schedule 40 is manufactured from Titanium Grade 5.
A: Aerospace components (e.g., hydraulic lines, structural tubing), Chemical processing equipment (e.g., heat exchangers, piping systems), Marine and offshore applications (e.g., seawater piping, structural elements).
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||