This Titanium Grade 5 seamless pipe, Schedule 40, offers exceptional strength, lightweight performance, and superior corrosion resistance. Engineered for critical applications, it ensures reliability under extreme conditions.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Pipe Size | 3.7" |
| Outside Diameter | 2.831" |
| Wall Thickness | 0.211" |
A high-performance industrial component, this Titanium Grade 5 seamless pipe is manufactured to exacting standards, featuring a nominal pipe size of 3.7 inches, an outside diameter of 2.831 inches, and a wall thickness of 0.211 inches. Composed of Ti-6Al-4V alloy, it provides an outstanding strength-to-weight ratio, excellent fatigue strength, and unparalleled resistance to a wide range of corrosive environments, including saltwater and aggressive chemicals. This makes it ideal for aerospace, marine, chemical processing, and oil & gas industries.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean and free of debris. 2. Utilize appropriate welding procedures for Titanium Grade 5, such as TIG welding in an inert gas atmosphere. 3. Employ proper joint preparation and alignment to maintain dimensional integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Contamination during welding. | Maintain a strict inert gas shielding protocol (e.g., Argon) to prevent oxidation and embrittlement. |
| Improper heat treatment after welding. | Follow recommended post-weld heat treatment procedures for Titanium Grade 5 to relieve residual stresses and maintain material properties. |
A: This Seamless Pipe, Schedule 40 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Marine hardware and piping systems, Chemical processing equipment, High-performance exhaust systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||