This Schedule 160 seamless pipe, crafted from Titanium Grade 5, offers exceptional strength-to-weight ratio and superior corrosion resistance for demanding applications.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Pipe Size | 4.4" |
| Outside Diameter | 4.900" |
| Wall Thickness | 0.256" |
Built to exacting engineering tolerances, this Titanium Grade 5 seamless pipe features a nominal pipe size (NPS) of 4.4 inches, an outside diameter (OD) of 4.900 inches, and a substantial wall thickness of 0.256 inches, corresponding to Schedule 160. Titanium Grade 5 (Ti-6Al-4V) offers an excellent combination of high strength, low density, and outstanding resistance to a wide range of corrosive media, including saltwater and many industrial chemicals. This robust construction makes it ideal for aerospace, marine, oil and gas exploration, and chemical processing where extreme performance is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper pipe end preparation, including beveling according to welding procedure specifications. 2. Thoroughly clean the pipe and surrounding area to remove any contaminants. 3. Execute welding using approved procedures and qualified personnel, ensuring inert gas shielding.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate cleaning of the pipe surface prior to welding. | Implement a rigorous cleaning protocol using appropriate solvents and brushes to remove all traces of oil, grease, and oxides before welding. |
| Using incorrect welding consumables or parameters for Titanium Grade 5. | Strictly adhere to the recommended welding consumables (e.g., ERTi-5) and parameters as specified in the welding procedure qualification record (WPQR). |
A: This Seamless Pipe, Schedule 160 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Marine hardware and piping systems, Oil and gas downhole tools, High-performance chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||