This Schedule 160 Titanium Grade 5 seamless pipe offers exceptional strength-to-weight ratio and corrosion resistance. Engineered for extreme environments and critical fluid transfer systems.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Pipe Size | 0.6" |
| Outside Diameter | 1.139" |
| Wall Thickness | 0.430" |
Precision-manufactured to tight tolerances, this 0.6" NPS (Nominal Pipe Size) Schedule 160 seamless pipe boasts an outside diameter of 1.139" and a substantial wall thickness of 0.430". Fabricated from Titanium Grade 5 (Ti-6Al-4V), it delivers superior mechanical properties, including excellent tensile strength, fatigue resistance, and outstanding corrosion immunity, particularly in oxidizing environments and against chlorides. This makes it ideal for high-pressure, high-temperature, and corrosive fluid handling in aerospace, chemical processing, and marine industries.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper pipe end preparation, including deburring and cleaning. 2. Utilize compatible welding procedures (e.g., Gas Tungsten Arc Welding - GTAW) with appropriate filler materials and inert gas shielding. 3. Perform non-destructive testing (NDT) such as radiography and dye penetrant inspection to verify weld integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect welding consumables or gas shielding. | Always refer to welding procedure specifications (WPS) for Titanium Grade 5 and use certified consumables and pure argon or helium shielding gas. |
| Insufficient cleaning of the pipe ends before welding. | Thoroughly degrease and mechanically clean the weld bevel area to remove any surface contaminants that could lead to weld defects. |
A: This Seamless Pipe, Schedule 160 is manufactured from Titanium Grade 5.
A: Aerospace structural components and fluid lines, Chemical processing equipment (reactors, heat exchangers), Marine propulsion systems and offshore platforms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||