This Titanium Grade 5 seamless pipe, Schedule 80, offers unparalleled corrosion resistance and high tensile strength. Engineered for critical applications where reliability is paramount.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Pipe Size | 5.0" |
| Outside Diameter | 3.839" |
| Wall Thickness | 0.303" |
Manufactured under strict quality controls, this 5.0" NPS (Nominal Pipe Size) Titanium Grade 5 seamless pipe features an outside diameter of 3.839" and a robust 0.303" wall thickness, adhering to Schedule 80 specifications. Titanium Grade 5 (Ti-6Al-4V) provides an exceptional strength-to-weight ratio, superior resistance to a wide range of corrosive media including saltwater, chlorides, and acids, and excellent performance at elevated temperatures. This makes it ideal for aerospace, marine, chemical processing, and high-performance fluid transfer systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper pipe alignment and support. 2. Employ qualified welding procedures and materials compatible with Titanium Grade 5. 3. Perform thorough post-weld inspection and cleaning to maintain material integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel welding consumables. | Always use welding consumables specifically designed for Titanium Grade 5 to prevent contamination and maintain alloy properties. |
| Inadequate joint preparation leading to porosity. | Thoroughly clean and bevel the pipe ends to ensure a clean, full-penetration weld without voids. |
A: This Seamless Pipe, Schedule 80 is manufactured from Titanium Grade 5.
A: Aerospace structural components and fuel lines, Marine hardware and offshore oil & gas equipment, Chemical processing and petrochemical industries, High-performance heat exchangers and tubing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||