This Schedule 80 seamless pipe, crafted from high-performance Titanium Grade 5, offers exceptional strength and superior corrosion resistance. Engineered for critical applications, it ensures reliability in extreme conditions.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Pipe Size | 4.9" |
| Outside Diameter | 2.798" |
| Wall Thickness | 0.479" |
Manufactured under strict quality controls, this Titanium Grade 5 seamless pipe conforms to relevant industry standards for its material composition and dimensional tolerances. The Grade 5 alloy, also known as Ti-6Al-4V, provides an outstanding combination of high strength, low density, and excellent corrosion resistance, particularly in oxidizing environments and chloride solutions. Its mechanical properties make it ideal for aerospace, marine, chemical processing, and high-pressure fluid conveyance systems where material integrity and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean, free of debris, and properly prepared for welding or connection. 2. Perform radiographic and ultrasonic testing on weld joints as per project specifications. 3. Hydrostatically test the installed piping system to verify integrity and leak-tightness at the required pressure.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate weld joint preparation leading to porosity or incomplete fusion. | Thoroughly clean and bevel pipe ends according to welding procedure specifications (WPS) and ensure proper purging with inert gas during welding. |
| Using inappropriate welding consumables not certified for Titanium Grade 5. | Utilize only welding filler metals specifically designed and certified for Titanium Grade 5 to maintain its mechanical properties and corrosion resistance. |
A: This Seamless Pipe, Schedule 80 is manufactured from Titanium Grade 5.
A: Aerospace structural components and engine parts, Marine hardware and offshore equipment, Chemical and petrochemical processing equipment, High-pressure fluid and gas transport systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||